Rear Cobra Brake Kit for 8.8 (4-lug) with Fox Axle Length - Drilled, Slotted Rotors

Rear Cobra brake 11.625" vented rotors, build for Fox axle length.

Brake kit includes:

• Pair of NEW cobra rear calipers
• Brake pads
• 11.625" Rotors (Drilled and Slotted) - 4lug. 
  
• Braided hoses
• Machined aluminum brackets
• Hardware

NOTE: Master cylinder changes are not needed on rear conversions only.  We always want to match the master cylinder to the front caliper piston area.  If you upgrade to Cobra brakes up front, we then would recommend our 15/16" bore master.

NOTE: These rotors are pre-drilled 5 lug, the 4 lug pattern is added.  Rotor locates on center register, so this is no issue and is not seen once the wheels are installed.

NOTE:  Fits with some 15" wheels but not all.  If there is a 15" wheel you are trying to fit, we can email templates to verify fitment. If you want to be able to run a variety of 15" wheels the 10.5" kit is a better option.

What is recommended with this rear kit?  If you have stock front brakes no master change is needed.  We would recommend a prop valve, our prop valve plug and if you want the park brake to work, our cables.  That is it!